Pneumatic actuated ball valve in Riyadh
Middleeast valve is the largest Pneumatic actuated ball valve in Riyadh. We supply to cities like Dammam, AI Khobar, AI Jubail, and Jeddah.
A pneumatic actuated ball valve is a type of valve that is operated using pneumatic (air pressure) power to control the flow of fluids (liquid or gas) through a piping system. The valve itself is a ball-shaped closure element with a hole (bore) through its center, which is used to regulate the flow of the fluid.
Here's a breakdown of how a pneumatic actuated ball valve works:
Valve Structure:
The valve consists of a hollow spherical ball with a hole (port or bore) drilled through its center. The ball is mounted within the valve body, and it can rotate within the body to control the flow of the fluid.
Actuator:
The pneumatic actuator is the component that provides the force to move the ball within the valve body. It typically operates on compressed air, converting the energy from the compressed air into mechanical motion.
Air Supply:
Compressed air is supplied to the pneumatic actuator. When air is introduced into the actuator, it creates a force that acts on the actuator mechanism, causing it to move.
Actuator Mechanism:
The actuator mechanism, often a piston or diaphragm, receives the compressed air and translates it into mechanical motion. This motion is used to rotate the ball within the valve body.
Ball Rotation:
As the actuator mechanism moves, it rotates the ball within the valve body. When the ball is turned, it aligns the bore with the inlet and outlet ports of the valve, allowing fluid to flow through or shuts off the flow when the bore is perpendicular to the ports.
Description:
Body Material: Cast steel (WCB, WCC, WC6, LCC, LCB), Stainless steel (SS304, SS316), Carbon steel(CF8, CF8M),
Class: 150 to 2500; PN10 to PN450
Size: ½” to 4”
End: Buttweld, Flanged, Socketweld, Threaded
Operation: Pneumatic actuated ball valve
Configuration of a Pneumatic Actuator:
1)4-20 amp
2)Pneumatic single acting actuators
3)Pneumatic double acting actuators
4)Pneumatic rotary actuators
5)Pneumatic Scotch and Yoke actuators
6)Pressure: 228 bar
Temperature:
1)Standard -4°F to 200°F (-20°C to 93°C)
2)Low -40°F to 176°F (-40°C to 80°C)
3)High 0°F to 300°F (-18°C to 149°C)
Visit Us:- https://www.middleeastvalv...
Middleeast valve is the largest Pneumatic actuated ball valve in Riyadh. We supply to cities like Dammam, AI Khobar, AI Jubail, and Jeddah.
A pneumatic actuated ball valve is a type of valve that is operated using pneumatic (air pressure) power to control the flow of fluids (liquid or gas) through a piping system. The valve itself is a ball-shaped closure element with a hole (bore) through its center, which is used to regulate the flow of the fluid.
Here's a breakdown of how a pneumatic actuated ball valve works:
Valve Structure:
The valve consists of a hollow spherical ball with a hole (port or bore) drilled through its center. The ball is mounted within the valve body, and it can rotate within the body to control the flow of the fluid.
Actuator:
The pneumatic actuator is the component that provides the force to move the ball within the valve body. It typically operates on compressed air, converting the energy from the compressed air into mechanical motion.
Air Supply:
Compressed air is supplied to the pneumatic actuator. When air is introduced into the actuator, it creates a force that acts on the actuator mechanism, causing it to move.
Actuator Mechanism:
The actuator mechanism, often a piston or diaphragm, receives the compressed air and translates it into mechanical motion. This motion is used to rotate the ball within the valve body.
Ball Rotation:
As the actuator mechanism moves, it rotates the ball within the valve body. When the ball is turned, it aligns the bore with the inlet and outlet ports of the valve, allowing fluid to flow through or shuts off the flow when the bore is perpendicular to the ports.
Description:
Body Material: Cast steel (WCB, WCC, WC6, LCC, LCB), Stainless steel (SS304, SS316), Carbon steel(CF8, CF8M),
Class: 150 to 2500; PN10 to PN450
Size: ½” to 4”
End: Buttweld, Flanged, Socketweld, Threaded
Operation: Pneumatic actuated ball valve
Configuration of a Pneumatic Actuator:
1)4-20 amp
2)Pneumatic single acting actuators
3)Pneumatic double acting actuators
4)Pneumatic rotary actuators
5)Pneumatic Scotch and Yoke actuators
6)Pressure: 228 bar
Temperature:
1)Standard -4°F to 200°F (-20°C to 93°C)
2)Low -40°F to 176°F (-40°C to 80°C)
3)High 0°F to 300°F (-18°C to 149°C)
Visit Us:- https://www.middleeastvalv...
7 months ago
